Now showing 1 - 7 of 7
  • Publication
    Inertial Sensor Technology Can Capture Changes in Dynamic Balance Control during the Y Balance Test
    Introduction: The Y Balance Test (YBT) is one of the most commonly utilised clinical dynamicbalance assessments. Research has demonstrated the utility of the YBT in identifying balancedeficits in individuals following lower limb injury. However, quantifying dynamic balancebased on reach distances alone fails to provide potentially important information related tothe quality of movement control and choice of movement strategy during the reaching action.The addition of an inertial sensor to capture more detailed motion data may allow for the inexpensive,accessible quantification of dynamic balance control during the YBT reach excursions.As such, the aim of this study was to compare baseline and fatigued dynamic balancecontrol, using reach distances and 95EV (95% ellipsoid volume), and evaluate the ability of95EV to capture alterations in dynamic balance control, which are not detected by YBT reachdistances. Methods: As part of this descriptive laboratory study, 15 healthy participants completedrepeated YBTs at 20, 10, and 0 min prior to and following a modified 60-s Wingate testthat was used to introduce a short-term reduction in dynamic balance capability. Dynamicbalance was assessed using the standard normalised reach distance method, while dynamicbalance control during the reach attempts was simultaneously measured by means of the95EV derived from an inertial sensor, worn at the level of the 4th lumbar vertebra. Results:Intraclass correlation coefficients for the inertial sensor-derived measures ranged from 0.76to 0.92, demonstrating strong intrasession test-retest reliability. Statistically significant altera-tions (p < 0.05) in both reach distance and the inertial sensor-derived 95EV measure wereobserved immediately post-fatigue. However, reach distance deficits returned to baseline levelswithin 10 min, while 95EV remained significantly increased (p < 0.05) beyond 20 min forall 3 reach distances. Conclusion: These findings demonstrate the ability of an inertial sensorderivedmeasure to quantify alterations in dynamic balance control, which are not capturedby traditional reach distances alone. This suggests that the addition of an inertial sensor tothe YBT may provide clinicians and researchers with an accessible means to capture subtlealterations in motor function in the clinical setting.
    Scopus© Citations 19  301
  • Publication
    Reliability, Validity and Utility of Inertial Sensor Systems for Postural Control Assessment in Sport Science and Medicine Applications: A Systematic Review
    Background Recent advances in mobile sensing and computing technology have provided a means to objectively and unobtrusively quantify postural control. This has resulted in the rapid development and evaluation of a series of wearable inertial sensor-based assessments. However, the validity, reliability and clinical utility of such systems is not fully understood. Objectives This systematic review aims to synthesise and evaluate studies that have investigated the ability of wearable inertial sensor systems to validly and reliably quantify postural control performance in sports science and medicine applications. Methods A systematic search strategy utilising the PRISMA guidelines was employed to identify eligible articles through ScienceDirect, Embase and PubMed databases. In total, 47 articles met the inclusion criteria and were evaluated and qualitatively synthesised under two main headings: measurement validity and measurement reliability. Furthermore, studies that investigated the utility of these systems in clinical populations were summarised and discussed. Results After duplicate removal, 4374 articles were identified with the search strategy, with 47 papers included in the final review. In total, 28 studies investigated validity in healthy populations, and 15 studies investigated validity in clinical populations; 13 investigated the measurement reliability of these sensor-based systems. Conclusions The application of wearable inertial sensors for sports science and medicine postural control applications is an evolving field. To date, research has primarily focused on evaluating the validity and reliability of a heterogeneous set of assessment protocols, in a laboratory environment. While researchers have begun to investigate their utility in clinical use cases such as concussion and musculoskeletal injury, most studies have leveraged small sample sizes, are of low quality and use a variety of descriptive variables, assessment protocols and sensor-mounting locations. Future research should evaluate the clinical utility of these systems in large high-quality prospective cohort studies to establish the role they may play in injury risk identification, diagnosis and management. This systematic review was registered with the International Prospective Register of Systematic Reviews on 10 August 2018 (PROSPERO registration: CRD42018106363): https://www.crd.york.ac.uk/PROSPERO/display_record.php?RecordID=106363.
    Scopus© Citations 51  1366
  • Publication
    Inertial sensory data provides depth to clinical measures of dynamic balance
    Objectives: Establish the role a single inertial sensor may play in the objective quantification of dynamic postural stability following acute ankle injuries.Background The Y Balance test (YBT) is one of the most commonly utilised clinical dynamic balance assessments. Research has demonstrated the utility of the YBT in identifying balance deficits in those with acute ankle injuries and chronic ankle instability. However, reach distances fail to provide information relating to the quality of balance strategy and dynamic stability. Motion capture systems are often employed to provide micro-level detail pertaining to an individuals postural stability. However, such systems are expensive, lack accessibility, hinder natural movement and require extensive processing expertise. The addition of inertial sensors may allow for the inexpensive, accessible quantification of postural stability in an unconstrained environment.Case Description Forty-two elite under-20 rugby union players were recruited as part of a wider study. Two athletes were identified to have sustained acute ankle injuries two weeks previously; one lateral ankle sprain and one deltoid ligament sprain. A single inertial sensor was mounted at the level of the 4th lumbar vertebra. Participants completed four practice YBTs bilaterally, prior to completing 3 recorded YBTs. Reach distance and inertial sensor data were recorded for each reach excursion.Outcomes When compared to the group mean, both athletes demonstrated no clinically meaningful reduction in reach distances for all three reach directions. However, both athletes demonstrated a higher 95% ellipsoid volume of sway than the healthy control group for all three directions of the YBT when completed on their affected limb.Conclusions Preliminary analysis suggests that inertial sensor data may provide information relating to the quality of dynamic postural stability following an acute ankle injury. Further investigation is required to establish the role that such measures may play in the assessment and management of ankle injuries.
      141
  • Publication
    Association of dynamic balance with sports related concussion: a prospective cohort study
    Background: Concussion is one of the most common sports-related injuries, with little understood about the modifiable and non-modifiable risk factors. Researchers have yet to evaluate the association between modifiable sensorimotor function variables and concussive injury. Purpose: To investigate the association between dynamic balance performance, a discrete measure of sensorimotor function, and concussive injuries. Study Design: Cohort study (diagnosis); Level of evidence, 3. Methods: A total of 109 elite male rugby union players were baseline tested in dynamic balance performance while wearing an inertial sensor and prospectively followed during the 2016-2017 rugby union season. The sample entropy of the inertial sensor gyroscope magnitude signal was derived to provide a discrete measure of dynamic balance performance. Logistic regression modeling was then used to investigate the association among the novel digital biomarker of balance performance, known risk factors of concussion (concussion history, age, and playing position), and subsequent concussive injury. Results: Participant demographic data (mean 6 SD) were as follows: age, 22.6 6 3.6 years; height, 185 6 6.5 cm; weight, 98.9 612.5 kg; body mass index, 28.9 6 2.9 kg/m2; and leg length, 98.8 6 5.5 cm. Of the 109 players, 44 (40.3%) had a history of concussion, while 21 (19.3%) sustained a concussion during the follow-up period. The receiver operating characteristic analysis for the anterior sample entropy demonstrated a statistically significant area under the curve (0.64; 95% CI, 0.52-0.76; P \ .05), with the cutoff score of anterior sample entropy 1.2, which maximized the sensitivity (76.2%) and specificity (53.4%) for identifying individuals who subsequently sustained a concussion. Players with suboptimal balance performance at baseline were at a 2.81-greater odds (95% CI, 1.02-7.74) of sustaining a concussion during the rugby union season than were those with optimal balance performance, even when controlling for concussion history. Conclusion: Rugby union players who possess poorer dynamic balance performance, as measured by a wearable inertial sensor during the Y balance test, have a 3-times-higher relative risk of sustaining a sports-related concussion, even when controlling for history of concussion. These findings have important implications for research and clinical practice, as it identifies a potential modifiable risk factor. Further research is required to investigate this association in a large cohort consisting of males and females across a range of sports.
    Scopus© Citations 24  631
  • Publication
    Capturing concussion related changes in dynamic balance using the quantified Y Balance Test - a case series of six elite rugby union players
    This paper investigates design considerations and challenges of integrating on-chip antennas in nanoscale CMOS technology at millimeter-wave (mm-wave) to achieve a compact front-end receiver for 5G communication systems. Solutions to overcome these challenges are offered and realized in digital 28-nm CMOS. A monolithic on-chip antenna is designed and optimized in the presence of rigorous metal density rules and other back-end-of-the-line (BEoL) challenges of the nanoscale technology. The proposed antenna structure further exploits ground metallization on a PCB board acting as a reflector to increase its radiation efficiency and power gain by 37.3% and 9.8 dB, respectively, while decreasing the silicon area up to 30% compared to the previous works. The antenna is directly matched to a two-stage low noise amplifier (LNA) in a synergetic way as to give rise to an active integrated antenna (AIA) in order to avoid additional matching or interconnect losses. The LNA is followed by a double-balanced folded Gilbert cell mixer, which produces a lower intermediate frequency (IF) such that no probing is required for measurements. The measured total gain of the AIA is 14 dBi. Its total core area is 0.83 mm 2 while the total chip area, including the pad frame, is 1.55 × 0.85 mm 2.
    Scopus© Citations 5  772
  • Publication
    Inter-session test-retest reliability of the quantified Y balance test
    The Y Balance test is the most common dynamic balance assessment used in clinical practice and research. However, the traditional measure of performance, the reach distance, fails to provide detailed information pertaining to the control of balance during the reach task. Recent research has demonstrated that a single wearable inertial sensor can capture detailed information pertaining to balance performance during the Y balance test, not captured by the traditional reach distances. To date, no research has been conducted investigating the inter-session test-retest reliability of the inertial sensor instrumented YBT. Thirty -two young healthy adults, aged between 18-40 were recruited as part of this study. Participants completed the quantified YBT protocol during two testing sessions, separated by 7-10 days. The findings from this study demonstrated that 26/36 (anterior), 31/36 (posteromedial) and 33/36 (posterolateral) quantified variables demonstrated good-excellent intra-session test-retest reliability. These findings suggest that the inertial sensor quantified YBT can provide a reliable measure of dynamic balance performance. Further research is required to investigate the capability of the quantified YBT to identify individuals at risk of injury/ disease and track recovery/ response to intervention.
    Scopus© Citations 7  629
  • Publication
    Objective Classification of Dynamic Balance Using a Single Wearable Sensor
    (SCITEPRESS – Science and Technology Publications, 2016-11-09) ; ; ; ; ;
    The Y Balance Test (YBT) is one of the most commonly used dynamic balance assessments in clinical and research settings. This study sought to investigate the ability of a single lumbar inertial measurement unit (IMU) to discriminate between the three YBT reach directions, and between pre and post-fatigue balance performance during the YBT. Fifteen subjects (age: 234, weight: 67.58, height: 1758, BMI: 222) were fitted with a lumbar IMU. Three YBTs were performed on the dominant leg at 0, 10 and 20 minutes. A modified Wingate fatiguing intervention was conducted to introduce a balance deficit. This was followed immediately by three post-fatigue YBTs. Features were extracted from the IMU, and used to train and evaluate the random-forest classifiers. Reach direction classification achieved an accuracy of 97.80%, sensitivity of 97.860.89% and specificity of 98.900.56%. Normal and abnormal balance performance, as influenced by fatigue, was classified with an accuracy of 61.90%-71.43%, sensitivity of 61.90%-69.04% and specificity of 61.90%-78.57% depending on which reach direction was chosen. These results demonstrate that a single lumbar IMU is capable of accurately distinguishing between the different YBT reach directions and can classify between pre and post-fatigue balance with moderate levels of accuracy.
    Scopus© Citations 16  822