Now showing 1 - 2 of 2
  • Publication
    Experimental Detection of Sudden Stiffness Change in a Structural System Employing Laser Doppler Vibrometry
    (Erredi Grafiche Editoriali, 2012-06-20) ; ; ;
    Sudden changes in the stiffness of a structure are often indicators of structural damage. Detection of such sudden stiffness change from the vibrations of structures is important for Structural Health Monitoring (SHM) and damage detection. Non-contact measurement of these vibrations is a quick and efficient way for successful detection of sudden stiffness change of a structure. In this paper, we demonstrate the capability of Laser Doppler Vibrometry to detect sudden stiffness change in a Single Degree Of Freedom (SDOF) oscillator within a laboratory environment. The dynamic response of the SDOF system was measured using a Polytec RSV-150 Remote Sensing Vibrometer. This instrument employs Laser Doppler Vibrometry for measuring dynamic response. Additionally, the vibration response of the SDOF system was measured through a MicroStrain G-Link Wireless Accelerometer mounted on the SDOF system. The stiffness of the SDOF system was experimentally determined through calibrated linear springs. The sudden change of stiffness was simulated by introducing the failure of a spring at a certain instant in time during a given period of forced vibration. The forced vibration on the SDOF system was in the form of a white noise input. The sudden change in stiffness was successfully detected through the measurements using Laser Doppler Vibrometry. This detection from optically obtained data was compared with a detection using data obtained from the wireless accelerometer. The potential of this technique is deemed important for a wide range of applications. The method is observed to be particularly suitable for rapid damage detection and health monitoring of structures under a model-free condition or where information related to the structure is not sufficient.
      80
  • Publication
    Monitoring of changes in bridge response using Weigh-In-Motion systems
    (Trans Tech Publications, 2013-07) ; ;
    Weigh-In-Motion (WIM) and Bridge Weigh-In-Motion (B-WIM) are systems that allow obtaining the axle weights of road vehicles in motion, at normal traffic speeds. While WIM employs sensors embedded in the road pavement, B-WIM use the strain recordings of a bridge to infer the traversing vehicle axle weights. Both systems have been heavily improved over the past decades, and commercial versions are currently in operation. The two main applications of these systems are: (1) to assess the traffic loading on the infrastructure, and (2) to enforce the maximum weight limits. This paper suggests a novel application of these two systems to identify changes in bridge stiffness. It requires the bridge to be instrumented with a B-WIM system and a WIM system nearby. The principle is to use both systems to evaluate the gross weight of vehicles passing over the bridge and correlate their predictions. Changes in correlation of the predicted axle weights over time will indicate either structural damage or faulty sensor. A finite element model of a coupled vehicle-bridge system with different damage scenarios is used to test the approach numerically. Vehicle mechanical properties and speeds are randomly sampled within a Monte Carlo simulation. Results show how correlation changes as damage increases and how this correlation can be employed as a damage indicator.
      268