Now showing 1 - 2 of 2
  • Publication
    Design and development of a low-cost thermal response rig
    (Institution of Civil Engineers, 2012-08-01) ;
    A thermal response test (TRT) is a controlled insitu test during which a known quantity of heat energy is injected into a closed loop heat-exchanger pipe while the heat dissipation rate into the surrounding ground is monitored. Results from a test can be interpreted to determine a number of ground thermal parameters with are vital design requirements for any medium to large scale ground source energy system. This paper describes the design and construction of a low cost TRT rig and compares the results obtained from a test using the constructed rig and a commercially built rig in order to evaluate the accuracy of the constructed equipment. The TRT rig is designed in accordance with the following principles: keep construction costs low, improve the cost-efficiency of TRT testing by incorporating remote data transmission capability and ensure attainment of sufficient accuracy to satisfy the design requirements of ground source energy systems. Analysis of data collected by the TRT rigs result in a calculated thermal conductivity of 1.9 W/mK in both cases. This value falls within the range expected for the tested geological formation and confirms the accuracy of both test rigs.
    Scopus© Citations 5  2063
  • Publication
    Thermal response testing of compromised borehole heat exchangers
    (Oxford University Press, 2012-03-19) ;
    The results of five thermal response tests (TRTs) are presented. Three of the tests were carried out consecutively on the same borehole to illustrate the importance of allowing artificially imposed thermal gradients to dissipate prior to commencement or re-commencement of a test following testing issues. The two remaining tests carried out on separate boreholes confirm the results obtained by the first(uncompromised) of the initial three tests. The testing regime demonstrates the necessity of careful performance of TRT’s and shows the variation in costs/required borehole length which may occur if testing problems occur on site.
    Scopus© Citations 3  609