Now showing 1 - 3 of 3
  • Publication
    The optimisation of dye sensitised solar cell working electrodes for graphene and SWCNTs containing quasi-solid state electrolytes
    In this study, we report improved power conversion efficiencies of various carbon based quasi-solid state electrolytes/DSSCs by optimising the thickness of TiO2 layer, incorporation of TiO2 scattering layer and application of dense compact surface layers of TiO2 on working electrodes. Single wall carbon nanotube (SWCNT) based quasi-solid state electrolytes showed increased power conversion efficiencies from 1.43% to 3.49%. For the mixture of graphene and SWCNTs the power conversion efficiencies improved from 2.50% to 2.93%. However, graphene based quasi-solid state electrolytes displayed small decreases in power conversion efficiencies from 2.10% to 1.96% due to the more viscous nature of this electrolyte. Electrochemical Impedance Spectroscopy (EIS) demonstrated that the addition of these various carbon based nanomaterials into PMII significantly decreases the charge transfer resistance at the counter electrode and hence the much better performance obtained with carbon based quasi-solid state electrolytes compared to pure PMII based DSSCs.
    Scopus© Citations 19  909
  • Publication
    Succinonitrile-based solid-state electrolytes for dye-sensitised solar cells
    Succinonitrile (SCN), a solid ion conductor (10−4 to 10−3 S/cm) in solid form at room temperature, is mixed with either 1,2-dimethyl-3-propylimidazoliuum iodide or 1-butyl-3-methyl imidazolium iodide ionic liquids for forming a solid plastic phase electrolyte for use in dye-sensitised solar cell (DSSC). Cells containing these two electrolytes showed best energy conversion efficiencies of 6.3% and 5.6%, respectively. The commonly used DSSC electrolyte additives inhibit the formation of the SCN plastic phase. However, for the first time, an SCN-additive (additive = guanidinium thiocyanate) electrolyte composition is reported here, which remains as a solid at room temperatures. By using these new solid electrolytes, a simple and rapid single-step filling procedure for making solid-state DSSC is outlined. This process, which reduces the required manufacturing steps from four to one, is most suitable for continuous, high-throughput, commercial DSSC manufacturing lines. These new electrolytes have been tested under low incident light levels (200 lx) to investigate their suitability for indoor DSSC applications
    Scopus© Citations 22  838
  • Publication
    Renewable energy technologies and its adaptation in an urban environment
    This general article is based on the inaugural talk delivered at the opening of OMTAT 2013 conference. It notes that the integration of renewable energy sources into living and transport sectors presents a daunting task, still. In spite of the fact that the earth and its atmosphere continually receive 1.7 × 1017 watts of radiation from the sun, in the portfolio of sustainable and environment friendly energy options, which is about 16% of the world’s energy consumption and mostly met by biomass, only a paltry 0.04% is accredited to solar. First and second generation solar cells offer mature technologies for applications. The most important difficulty with regards to integration with structures is not only the additional cost, but also the lack of sufficient knowledge in managing the available energy smartly and efficiently. The incorporation of PV as a part of building fabric greatly reduces the overall costs compared with retrofitting. BIPV (Building Integrated photovoltaic) is a critical technology for establishing aesthetically pleasing solar structures. Infusing PV and building elements is greatly simplified with some of the second generation thin film technologies now manufactured as flexible panels. The same holds true for 3rd generation technologies under development such as, and dye- and quantum dot- sensitized solar cells . Additionally, these technologies offer transparent or translucent solar cells for incorporation into windows and skylights. This review deals with the present state of solar cell technologies suitable for BIPV and the status of BIPV applications and its future prospects.
    Scopus© Citations 1  2155