Now showing 1 - 5 of 5
  • Publication
    Cold plasma inactivation of bacterial biofilms and reduction of quorum sensing regulated virulence factors
    The main objectives of this work were to investigate the effect of atmospheric cold plasma (ACP) against a range of microbial biofilms commonly implicated in foodborne and healthcare associated human infections and against P. aeruginosa quorum sensing (QS)-regulated virulence factors, such as pyocyanin, elastase (Las B) and biofilm formation capacity post-ACP treatment. The effect of processing factors, namely treatment time and mode of plasma exposure on antimicrobial activity of ACP were also examined. Antibiofilm activity was assessed for E. coli, L. monocytogenes and S. aureus in terms of reduction of culturability and retention of metabolic activity using colony count and XTT assays, respectively. All samples were treated 'inpack' using sealed polypropylene containers with a high voltage dielectric barrier discharge ACP generated at 80 kV for 0, 60, 120 and 300 s and a post treatment storage time of 24 h. According to colony counts, ACP treatment for 60 s reduced populations of E. coli to undetectable levels, whereas 300 s was necessary to significantly reduce populations of L. monocytogenes and S. aureus biofilms. The results obtained from XTT assay indicated possible induction of viable but non culturable state of bacteria. With respect to P. aeruginosa QS-related virulence factors, the production of pyocyanin was significantly inhibited after short treatment times, but reduction of elastase was notable only after 300 s and no reduction in actual biofilm formation was achieved post-ACP treatment. Importantly, reduction of virulence factors was associated with reduction of the cytotoxic effects of the bacterial supernatant on CHO-K1 cells, regardless of mode and duration of treatment. The results of this study point to ACP technology as an effective strategy for inactivation of established biofilms and may play an important role in attenuation of virulence of pathogenic bacteria. Further investigation is warranted to propose direct evidence for the inhibition of QS and mechanisms by which this may occur.
      104Scopus© Citations 122
  • Publication
    Assessing the Biological Safety of Atmospheric Cold Plasma Treated Wheat Using Cell and Insect Models
    Atmospheric cold plasma (ACP) is under investigation for an extensive range of biocontrol applications in food biosystems. However, the development of a novel intervention technology requires a thorough evaluation of the potential for negative effects and the implications for the human and animal food chains' safety. The evaluations were performed using a contained, high-voltage, dielectric barrier discharge plasma system. The cytotoxicity of two types of food models-a liquid model (wheat model medium (WMM)) vs. a solid model (wheat grain extract (WGE)) was compared in vitro using the mammalian cell line CHO-K1. The residual toxicity of ACP treatment of grains for food purposes was assessed using the invertebrate model Tribolium castaneum, by feeding the beetles with flour produced from ACP-treated wheat grains. The cytotoxic effects and changes in the chemistry of the ACP-treated samples were more pronounced in samples treated in a liquid form as opposed to actual wheat grains. The feeding trial using T. castaneum demonstrated no negative impacts on the survivability or weight profiles of insects. Investigations into the interactions of plasma-generated species with secondary metabolites in the food matrices are necessary to ensure the safety of plasma for food applications.
      184Scopus© Citations 10
  • Publication
    Effects of cold plasma on wheat grain microbiome and antimicrobial efficacy against challenge pathogens and their resistance
    The safety and quality of cereal grain supplies are adversely impacted by microbiological contamination, with novel interventions required to maximise whole grains safety and stability. The microbiological contaminants of wheat grains and the efficacy of Atmospheric Cold Plasma (ACP) for potential to control these risks were investigated. The evaluations were performed using a contained reactor dielectric barrier discharge (DBD) system; samples were treated for 0–20 min using direct and indirect plasma exposure. Amplicon-based metagenomic analysis using bacterial 16S rRNA gene and fungal 18S rRNA gene with internal transcribed spacer (ITS) region was performed to characterize the change in microbial community composition in response to ACP treatment. The antimicrobial efficacy of ACP against a range of bacterial and fungal contaminants of wheat, was assessed to include individual isolates from grains as challenge pathogens. ACP influenced wheat microbiome composition, with a higher microbial diversity as well as abundance found on the untreated control grain samples. Culture and genomic approaches revealed different trends for mycoflora detection and control. A challenge study demonstrated that using direct mode of plasma exposure with 20 min of treatment significantly reduced the concentration of all pathogens. Overall, reduction levels for B. atrophaeus vegetative cells were higher than for all fungal species tested, whereas B. atrophaeus spores were the most resistant to ACP among all microorganisms tested. Of note, repeating sub-lethal plasma treatment did not induce resistance to ACP in either B. atrophaeus or A. flavus spores. ACP process control could be tailored to address diverse microbiological risks for grain stability and safety.
      116Scopus© Citations 25
  • Publication
    High voltage atmospheric cold air plasma control of bacterial biofilms on fresh produce
    Atmospheric cold plasma (ACP) offers great potential for decontamination of food borne pathogens. This study examined the antimicrobial efficacy of ACP against a range of pathogens of concern to fresh produce comparing planktonic cultures, monoculture biofilms (Escherichia coli, Salmonella enterica, Listeria monocytogenes, Pseudomonas fluorescens) and mixed culture biofilms (Listeria monocytogenes and Pseudomonas fluorescens). Biotic and abiotic surfaces commonly occurring in the fresh food industry were investigated. Microorganisms showed varying susceptibility to ACP treatment depending on target and process factors. Bacterial biofilm populations treated with high voltage (80 kV) ACP were reduced significantly (p < 0.05) in both mono- and mixed species biofilms after 60 s of treatment and yielded non-detectable levels after extending treatment time to 120 s. However, an extended time was required to reduce the challenge mixed culture biofilm of L. monocytogenes and P. fluorescens inoculated on lettuce, which was dependent on biofilm formation conditions and substrate. Contained treatment for 120 s reduced L. monocytogenes and P. fluorescens inoculated as mixed cultures on lettuce (p < 0.05) by 2.2 and 4.2 Log 10 CFU/ml respectively. When biofilms were grown at 4 °C on lettuce, there was an increased resistance to ACP treatment by comparison with biofilm grown at temperature abuse conditions of 15 °C. Similarly, L. monocytogenes and P. fluorescens exposed to cold stress (4 °C) for 1 h demonstrated increased tolerance to ACP treatment compared to non-stressed cells. These finding demonstrates that bacterial form, mono versus mixed challenges as well as environmental stress conditions play an important role in ACP inactivation efficacy.
    Scopus© Citations 62  82
  • Publication
    Efficacy of Cold Plasma for Direct Deposition of Antibiotics as a Novel Approach for Localized Delivery and Retention of Effect
    Antimicrobial coating of medical devices has emerged as a potentially effective tool to prevent or ameliorate device-related infections. In this study the plasma deposition process for direct deposition of pharmaceutical drugs on to a range of surfaces and the retention of structure function relationship and antimicrobial efficacy against mono-species biofilms were investigated. Two selected sample antibiotics—ampicillin and gentamicin, were deposited onto two types of surfaces—polystyrene microtiter plates and stainless steel coupons. The antimicrobial efficacy of the antibiotic-coated surfaces was tested against challenge populations of both planktonic and sessile Escherichia coli and Pseudomonas aeruginosa, with responses monitored for up to 14 days. The plasma deposition process bonded the antibiotic to the surfaces, with localized retention of antibiotic activity. The antibiotics deposited on the test surfaces retained a good efficacy against planktonic cells, and importantly prevented biofilm formation of attached cells for up to 96 h. The antibiotic rapidly eluted from the surface of antibiotic-coated surfaces to the surrounding medium, with retention of effect in this surrounding milieu for up to 2 weeks. Control experiments established that there was no independent antimicrobial or growth promoting effect of the plasma deposition process, where there was no antibiotic in the helium plasma assisted delivery stream. Apart from the flexibility offered through deposition on material surfaces, there was no additive or destructive effect associated with the helium assisted plasma deposition process on the antibiotic. The plasma assisted process was a viable mean of coating clinically relevant materials and developing innovative functional materials with retention of antibiotic activity, without employing a linker or plasma modified polymer, thus minimizing bio-compatibility issues for medical device materials. This offers potential to prevent or control instrumented or non-permanent device associated infection localized to the surgical or implant site.
      159Scopus© Citations 9