Connolly, L. C.

Thumbnail Image
Preferred name
Connolly, L. C.
Official Name
Connolly, L. C.

Research Output

Filters

1
1
Reset filters

Settings

Now showing 1 - 1 of 1
  • Publication
    Calculation of the Dynamic Allowance for Railway Bridges from Direct Measurement
    (Civil-Comp Press, 2016-04-08)
    Connolly, L. C. 
    ;
    Hajializadeh, Donya 
    ;
    Leahy, Cathal 
    ;
    O'Connor, Alan 
    ;
    O'Brien, Eugene J. 
    ;
    Bowe, Cathal 
    In a traditional deterministic assessment, a dynamic amplification factor (DAF) is applied to the static loading in order to account for dynamics. The codified DAF values are appropriately conservative in order to consider the wide range of structures and load effects to which they are applied. In the current analysis, a site specific assessment dynamic ratio (ADR) is calculated from direct measurement on an 80 year old steel truss Railway Bridge. The ADR is defined as the ratio of characteristic total stress to the characteristic static stress. The application of ADR is a relatively new concept which has rarely been considered for railway bridges. An assessment performed on the bridge in question showed a decrease in the dynamic allowance when considering the site specific ADR, corresponding to a 26% decrease in calculated stress. The measurements available were also used to derive a robust stochastic model for dynamic allowance which considered the correlation between DAF and stress level. The developed model was applied to a probabilistic assessment and resulted in a 9% increase in reliability.
      450