Options
Murphy, Jimmy
Preferred name
Murphy, Jimmy
Official Name
Murphy, Jimmy
Research Output
Now showing 1 - 4 of 4
- PublicationDynamic Effects of Anchor Positional Tolerance on Tension Moored Floating Wind TurbineFor water depths greater than 60m floating wind turbines will become the most economical option for generating offshore wind energy. Tension mooring stabilised units are one type of platform being considered by the offshore wind energy industry. The complex mooring arrangement used by this type of platform means that the dynamics are greatly effected by offsets in the positioning of the anchors. This paper examines the issue of tendon anchor position tolerances. The dynamic effects of three positional tolerances are analysed in survival state using the time domain FASTLink. The severe impact of worst case anchor positional offsets on platform and turbine survivability is shown. The worst anchor misposition combinations are highlighted and should be strongly avoided. Novel methods to mitigate this issue are presented.
251Scopus© Citations 2 - PublicationSensor measurement strategies for monitoring offshore wind and wave energy devices(IOP Publishing, 2015-07-09)
; ; ; ; While the potential of offshore wind and wave energy devices is well established and accepted, operations and maintenance issues are still not very well researched or understood. In this regard, scaled model testing has gained popularity over time for such devices at various technological readiness levels. The dynamic response of these devices are typically measured by different instruments during such scaled tests but agreed sensor choice, measurement and placement guidelines are still not in place. This paper compared the dynamic responses of some of these sensors from a scaled ocean wave testing to highlight the importance of sensor measurement strategies. The possibility of using multiple, cheaper sensors of seemingly inferior performance as opposed to the deployment of a small number of expensive and accurate sensors are also explored. An energy aware adaptive sampling theory is applied to highlight the possibility of more efficient computing when large volumes of data are available from the tested structures. Efficient sensor measurement strategies are expected to have a positive impact on the development of an device at different technological readiness levels while it is expected to be helpful in reducing operation and maintenance costs if such an approach is considered for the devices when they are in operation.248Scopus© Citations 13 - PublicationVisual inspection and bridge managementThis paper estimates visual inspection quantitatively prior to its implementation in a Bridge Management System using a Value of Information (VoI) approach employing a Bayesian pre-posterior analysis. Information from a significant number of real bridges from Ireland and Portugal are considered in this regard following existing commercial practices. The variation of different parameters on the estimated VoI is investigated including the assumed probabilistic models of the prior bridge state, the likelihood of inspector assigned condition ratings and the economic setting surrounding the cost matrix for maintenance decision alternatives. The values of no information, perfect information and imperfect information are presented and the change in the optimal strategy based on such information is assessed. The effect of human imperfections in assessment and difference in condition rating scale are also estimated. The studies and findings of this paper are expected to allow a better insight for practising engineers and researchers working in bridge management.
640Scopus© Citations 41 - PublicationThe Hurst exponent as an indicator of the behaviour of a model monopile in an ocean wave testing basinWith the importance of renewable energy well-established worldwide, and targets of such energy quantified in many cases, there exists a considerable interest in the assessment of wind and wave devices. While the individual components of these devices are often relatively well understood and the aspects of energy generation well researched, there seems to be a gap in the understanding of these devices as a whole and especially in the field of their dynamic responses under operational conditions. The mathematical modelling and estimation of their dynamic responses are more evolved but research directed towards testing of these devices still requires significant attention. Model-free indicators of the dynamic responses of these devices are important since it reflects the as-deployed behaviour of the devices when the exposure conditions are scaled reasonably correctly, along with the structural dimensions. This paper demonstrates how the Hurst exponent of the dynamic responses of a monopile exposed to different exposure conditions in an ocean wave basin can be used as a model-free indicator of various responses. The scaled model is exposed to Froude scaled waves and tested under different exposure conditions. The analysis and interpretation is carried out in a model-free and output-only environment, with only some preliminary ideas regarding the input of the system. The analysis indicates how the Hurst exponent can be an interesting descriptor to compare and contrast various scenarios of dynamic response conditions.
223Scopus© Citations 5