Thermal shock resistance of polycrystalline cubic boron nitride
Files in This Item:
|DCarolanThermalShock_Close_to_Final_Draft DONE.pdf||3.79 MB||Adobe PDF||Download|
|Title:||Thermal shock resistance of polycrystalline cubic boron nitride||Authors:||Carolan, Declan
|Permanent link:||http://hdl.handle.net/10197/4613||Date:||Aug-2012||Online since:||2013-09-26T16:19:41Z||Abstract:||The effect of thermal shock on the exural strength has been investigated experimentally. It was found that the variation in exural strength with quench temperature was influenced by the CBN grain size. Polycrystalline material containing small CBN grains showed a discontinuous drop in measured exural strength above a material dependent critical quench temperature difference, delta Tc. The sharp decrease in measured strength is accompanied by unstable crack propagation. Material containing a significantly larger CBN grain size, exhibited a gradual decrease in strength above the critical quench conditions. The experimental observations agreed with an established theory developed for thermal shock of alumina. The theoretically calculated critical temperatures agree well with the observed experimental data for each material when a aw size equal to the CBN grain size is employed.||Type of material:||Journal Article||Publisher:||Elsevier||Journal:||Journal of the European Ceramic Society||Volume:||32||Issue:||10||Start page:||2581||End page:||2586||Copyright (published version):||2012 Elsevier||Keywords:||Cubic Boron Nitride; fracture; thermal shock||DOI:||10.1016/j.jeurceramsoc.2012.03.013||Language:||en||Status of Item:||Peer reviewed|
|Appears in Collections:||Mechanical & Materials Engineering Research Collection|
Show full item record
This item is available under the Attribution-NonCommercial-NoDerivs 3.0 Ireland. No item may be reproduced for commercial purposes. For other possible restrictions on use please refer to the publisher's URL where this is made available, or to notes contained in the item itself. Other terms may apply.