Use of drinking water treatment residuals to control the internal phosphorus loading from lake sediments: Laboratory scale investigation

DC FieldValueLanguage
dc.contributor.authorWang, Changhuien
dc.contributor.authorGao, Sijiaen
dc.contributor.authorPei, Yuanshengen
dc.contributor.authoret al.en
dc.date.accessioned2013-11-08T09:08:17Z-
dc.date.available2013-11-08T09:08:17Z-
dc.date.copyright2013 Elsevieren
dc.date.issued2013-06en
dc.identifier.citationChemical Engineering Journalen
dc.identifier.urihttp://hdl.handle.net/10197/4856-
dc.description.abstractThis work investigated a novel approach of reusing drinking water treatment residuals (WTRs) to reduce the internal P loading from lake sediments under varied levels of dissolve oxygen (DO) in laboratory scale. The results showed that although the internal P loading increased as the DO level decreasing, WTRs can significantly reduce the internal P loading under different DO levels; in particular, under high DO level (5ā€“8 mg Lāˆ’1), the internal P loading can be reduced by 100%. The results of P fractionation suggested that the retained-P by WTRs existed as the NaOH extractable P. The P nuclear magnetic resonance spectroscopy (31P NMR) analysis further demonstrated that the retained-P was the orthophosphate, orthophosphate monoesters, orthophosphate diesters and pyrophosphate. Moreover, application of WTRs had marginal effects on Fe and Al concentrations and pH of the overlaying water. Therefore, WTRs can be an ideal material for controlling the internal P loading for lake restoration in large scale.en
dc.language.isoenen
dc.publisherElsevieren
dc.relation.requiresEarth Institute Research Collectionen
dc.rightsThis is the author's version of a work that was accepted for publication in Chemical Engineering Journal. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published in Chemical Engineering Journal (225, , (2013)) DOI: http://dx.doi/org/10.1016/j.cej.2013.03.074en
dc.subjectLake sedimenten
dc.subjectwater treatment residualsen
dc.subjectphosphorusen
dc.subject31P NMRen
dc.subjectfractionationen
dc.titleUse of drinking water treatment residuals to control the internal phosphorus loading from lake sediments: Laboratory scale investigationen
dc.typeJournal Articleen
dc.internal.availabilityFull text availableen
dc.statusPeer revieweden
dc.identifier.volume225en
dc.identifier.startpage93en
dc.identifier.endpage99en
dc.identifier.doi10.1016/j.cej.2013.03.074-
dc.neeo.contributorWang|Changhui|aut|-
dc.neeo.contributorGao|Sijia|aut|-
dc.neeo.contributorPei|Yuansheng|aut|-
dc.neeo.contributoret al.||aut|-
dc.internal.notespaper3.pdfen
dc.description.adminDeposited by bulk importen
dc.internal.rmsid342971436en
dc.date.updated2013-11-07T16:26:25.609Zen
item.grantfulltextopen-
item.fulltextWith Fulltext-
Appears in Collections:Earth Institute Research Collection
Civil Engineering Research Collection
Files in This Item:
File Description SizeFormat 
paper3.pdf915.65 kBAdobe PDFDownload
Show simple item record

SCOPUSTM   
Citations 10

27
Last Week
1
Last month
checked on Aug 17, 2018

Page view(s) 50

63
checked on May 25, 2018

Download(s) 20

334
checked on May 25, 2018

Google ScholarTM

Check

Altmetric


This item is available under the Attribution-NonCommercial-NoDerivs 3.0 Ireland. No item may be reproduced for commercial purposes. For other possible restrictions on use please refer to the publisher's URL where this is made available, or to notes contained in the item itself. Other terms may apply.