Options
Calculation of the Dynamic Allowance for Railway Bridges from Direct Measurement
File(s)
File | Description | Size | Format | |
---|---|---|---|---|
c_186.pdf | 1.32 MB |
Date Issued
08 April 2016
Date Available
21T10:27:07Z February 2018
Abstract
In a traditional deterministic assessment, a dynamic amplification factor (DAF) is applied to the static loading in order to account for dynamics. The codified DAF values are appropriately conservative in order to consider the wide range of structures and load effects to which they are applied. In the current analysis, a site specific assessment dynamic ratio (ADR) is calculated from direct measurement on an 80 year old steel truss Railway Bridge. The ADR is defined as the ratio of characteristic total stress to the characteristic static stress. The application of ADR is a relatively new concept which has rarely been considered for railway bridges. An assessment performed on the bridge in question showed a decrease in the dynamic allowance when considering the site specific ADR, corresponding to a 26% decrease in calculated stress. The measurements available were also used to derive a robust stochastic model for dynamic allowance which considered the correlation between DAF and stress level. The developed model was applied to a probabilistic assessment and resulted in a 9% increase in reliability.
Type of Material
Conference Publication
Publisher
Civil-Comp Press
Language
English
Status of Item
Peer reviewed
Part of
Pombo, J. (ed.). Proceedings of the Third International Conference on Railway Technology: Research, Development and Maintenance
Description
Railways 2016: The Third International Conference on Railway Technology: Research, Development and Maintenance, Sardinia, Italy, 5-8 April 2016
This item is made available under a Creative Commons License
Owning collection
Views
1319
Last Week
1
1
Last Month
2
2
Acquisition Date
Mar 24, 2023
Mar 24, 2023
Downloads
335
Last Week
5
5
Last Month
9
9
Acquisition Date
Mar 24, 2023
Mar 24, 2023